EBK System
The E-BikeKit™ Complete Conversion System offers the ultimate electric bicycle conversion solution
The complete system has everything you need "out of the box" to convert your conventional bike into a high-quality electric bike. All hub motor wheels are hand-built in the USA.
Speed: 20 MPH (36v), 26MPH (48v)
Range: 36v9.5ah, 36v10ah Prismatic, 48v9.5ah / (All 12-34 Miles)
Charging Time: 2.5hrs - 4.5hrs (depending on charger)
Complete System includes the E-BikeKit Conversion Kit & the E-BikeKit LiFePo4 Battery
With this system you can expect to go from 12-34 miles on a full charge.
This complete conversion system with LiFePO4 battery pack offers both e-bike novices and experienced electric bicycle riders safety, power, convenience and reliability. Engineered to comply with USA Federal guidelines and requires no insurance or licensing in most states. If you are deciding whether to convert your existing bike or to buy a complete electric bike you should know that bikes converted with the E-BikeKit Complete Conversion System are comparable to complete electric bikes costing more than $2500. The E-BikeKit Complete Conversion System is simply the best conversion system available.
Specifications:
Wheel: Hand-Built in the USA w/ 500-750 Watt Brushless Hub Motor
*Rear wheels have standard 6-bolt ISO rotor mount to allow use of any 6-bolt rotor/brake
Rim:Flat profile double-walled
Spokes: 13 Gauge Steel
Hub Weight: 14 Pounds
Top Speed: 20 MPH (36 volts) / 26 MPH (48 volts)*
Power: 36V (750W) or 48V (1000W)*
**All dependent on battery type, weight of rider, amount of pedaling, route and weather conditions.
E-BikeKit™ Conversion Kit System Includes:
1 x Hand-Built Wheel w/ 500-750 Watt Brushless Hub Motor
1 x LiFePO4 Battery Pack w/ 1500+ Cycles (36v9.5ah, 36v10ah Prismatic or 48v9.5ah)
1 x LiFePO4 Smart Charger (2.0amp or 3.5amp)
1 x 36 Volt 22 Amp Intelligent Motor Controller (works w/ any 36v or 48v battery pack)
1 x 3 Speed Switch (Optional) - High(100%), Medium(60%) & Low(30%) Setting
1 x Half-Twist or Thumb Throttle & Matching Grip
2 x E-Brake Handles w/ Electric Cutoff Switches
1 x Battery Harness Wire (for connecting any 36v or 48v battery)
1 x Universal Stainless Steel Torque Arm
15 x Black Zip Ties (for neatly securing wiring to the frame)
1 x 3mm Metric Hex Key (to mount the throttle)
1 x Owner's Manual & Installation Instructions
1 x E-BikeKit™ T-Shirt
Note: High Quality 30amp Anderson Powerpole Connectors are Standard on all E-BikeKit conversion products.
Every E-BikeKit hub motor wheel is been hand-built in the USA by a professional wheel builder with experience building wheels with hub motors for electric bike conversions.
Every wheel is stress tested during the building process. This ensures that your new E-BikeKit wheel will be true, round and perfect out of the box.
IMPORTANT: Initial “Wheel Tune Up” – Highly Suggested
Spokes will stretch and wheels will settle and loosen within the first 50-100 miles. It is highly suggested that you schedule a “wheel tune up” within your first 50-100 miles of riding on your new wheel. Your local bike shop should be able to service your hub motor wheel, tightening spokes and ensuring the wheel is round and true. The extra torque of a hub motor stretches spokes. This is expected within the first 50-100 miles of riding. The initial wheel adjustment is most important. Subsequent “wheel tune-ups” are recommended every 3 months or 400 miles, whichever comes first.
E-BikeKit™ LiFePo4 Battery
The E-BikeKit™ LiFePO4 Battery is Among the BEST E-Bike Battery Options Available Anywhere and comes with an Industry Leading 18 Month Warranty
Developed by EV battery experts this LiFePO4 battery offers "best in class" technology, safety, power and convenience. Proprietary upgrades in design and USA professional testing and quality control ensure this battery will deliver performance and power with every one of its 1500+ lifecycles.
Every pack is water sealed in the USA to be 99% water resistant.
Cycle Life: 1500+ (charge - discharge cycles before nominal capacity falls below 80%)
Range: 36v9.5ah, 36v10ah Prismatic, 48v9.5ah / (All 12-34 Miles)
Charging Time: 2.5hrs - 4.5hrs
Weight: 36v9.5ah(9 Pounds), 36v10ah Prismatic(12 Pounds), 48v9.5ah(12 Pounds)
Warranty: Industry Leading 18 Months
Features:
* Latest LiFePo4 (Lithium Iron Phosphate)
* "Safe Chemistry" technology - Least Toxic of any existing battery chemistry
* Advanced compact built-in BMS(battery management system)
* Over Discharge Protection: To prevent damage to your battery, the BMS will monitor every cell in the battery pack. Over Charge, Over Discharge, Short Circuit Protection
* Lightweight impact resistant aluminum battery enclosure
* On Off Key Switch: Locks battery box to provided Rack System
* Sliding & Locking design
* Convenient carry handle
"As a plug and play, ready to ride battery to go with a motor kit,
this is the best offering seen so far"
-E-Bike Aficionado
Endless-Sphere.com Expert Review
Includes:
* Plug & Ride 14 AWG Battery Wire Harness with Anderson Powerpole Connectors
* Mounting Brackets and Sliding Plate (for easily securing to rear bicycle rack)
Battery Specifications:
* Dimensions: 14" x 2 3/4" x 6"
* Voltage: 36 or 48 Volts
* Capacity: 36v9.5ah, 36v10ah Prismatic, 48v9.5ah
* Cycle Life: 1500+
* Discharge Plug Type: Anderson Powerpole 30 Amp
* Memory Effect: Zero - demonstrates excellent shelf life and is maintenance free
* Safety: Extremely Safe
* Environmentally: Best of any EV battery technology
BMS(Battery Management System):
* Over-Charge Protection: 3.85V per cell - 46.2v ( 12 cells )
* Over-Discharge Protection: 2.3V per cell - 27.6 (12 cells )
* Continuous Current: 20A
* Max/Peak Discharge Current: 25A
* Max Charge Current: 5A
* Short Circuit Protection: Yes
* Balancing: Yes
Proper Care, Usage Instructions & Recommendations:
* Charge completely before 1st use.
* Charger Light Indicator: RED when charging / GREEN when fully charged
* Store in cool dry place
* When storing the battery for extended periods of time (1 month or more ) fully charge and then disconnect the charger
* Always assist motor by pedaling when climbing hills to increase battery life
* Always store battery indoors at night. Never leave your battery outside overnight.
* Disconnect the battery wire from the Controller when not in use
* Do not intentionally short battery leads
* Use only supplied charger
* Leaving the charger plugged into the battery for extended periods of time is ok
* No “Memory Effect “, this battery can be recharged at any time, in fact, it is always better to charge fully before each ride.
* Secure the battery to the bicycle and lock into place with Key Lock
* In very cold climate ( 0 Celsius ) , the battery will have less capacity
Compatible with 36v/48v controllers rated 22 amps Max or less. If you do not know the power rating of your system, please contact us before purchasing, we can help you determine if our E-BikeKit™ LIFePO4 Battery will work for you.
Power Plug Options
PLEASE NOTE: Batteries ship separately.
Industry Leading 18 Month Warranty
LiFePo4 Battery Packs are warranted for a period of 18 months from the date of purchase. A pack will be deemed defective if it fails to deliver 80% of nominal capacity within 1 year of purchase when discharged at 1.5C with a static resistive load following full charge with an approved charger. An E-BikeKit™ LiFePo4 battery will be deemed defective if it fails to deliver any discharge within 18 months of purchase when discharged at 1.5C with a static resistive load following full charge with an approved charger.
* This kit is designed for use with a 36V battery, but it's capable of running at 48V. Although this will provide higher top speeds (between 24-28 mph), it will exceed Federal Laws and your bike may become classified as a 'motor vehicle.
